Vacuum System Accessories
CVU Machine Stand
Fury 2400 CVU 16″ Machine Stand
Part Number: KSE-8000
Gum Blaster Tool
Gum Blaster Kit
Part Number: ASE-0160
Works great for blasting gum spots, simply place the gum blaster tool over the gum spot and squeeze your pressure washer trigger gun.
The turbo nozzle will then rotate at 3000 RPM and pressure up to 4000 PSI at temperatures up to 212 degrees F.
The vacuum will then suck up the water and gum residue, leaving the surface free of gum, without spreading it further from the gum spot.
Specs:
- 2″ Vacuum hose hook-up
- Heavy duty brush to create vacuum seal and eliminate overspray
- YR51K40 Turbo Nozzle rotates at 3000 RPM
- Inline 100 mesh filter to keep debris out of turbo nozzle
- 212* F Rated
- Minimum Pressure Required 2600 PSI
- Maximum Pressure 4000 PSI
- 1/4″ Male quick coupler for easy hook up to lance
- 3- Adjustable caster for easy maneuverability
- Removable cap assembly for easy service of the turbo nozzle
- Powder coated paint
Diesel Fired Stainless Steel Water Heater
Specifications:
Affordable Temperature Control
High Pressure Flow Switch
Powder Coat Paint
Schedule 80 Coil
Part Number:
ASE6-0002 – 12 VDC Model
ASE6-0003- 120 VAC Model
Primary Separation Tank Filtration System
Part Number:
K01-2450- This is recommended for the Fury 2400 without the CVU
ASE-3201 – This is recommended for the Fury 2400CVU Part Numbers: ASE-3100, ASE-3101, ASE-3102, ASE-3103, ASE-3104 and ASE-3105
ASE-3202- This is recommended for the Fury 2400CVU Part Numbers: ASE-3106 and ASE-3107
Sand Tube
Fill with sand or stone and close the Velcro flaps to prepare the tube.
Great to divert water around doorways or drainage systems.
Durable nylon fabric
8″ X 48″ – Black
Part Number: TU48BK
2″ Heavy Duty Vacuum Hose
Fury 2400 Hose
50FT Supplied with every 2400 System
2″ x 50′ Black w/ Cuffs: Part Number: 11-195010
2″ x 100′ Black w/ Cuffs: Part Number: 11-195015
Fury 2400 CVU Hose
100 FT Supplied with every 2400 CVU System
2″ x 50′ Black w/ Cam Lever Couplings: Part Number: HSE-3200
2″ x 100′ Black w/ Cam Lever Couplings: Part Number: HSE-320
Vacuum Disk
Part Number: K01-2515
- Our sturdy vacuum disk is the perfect addition to your vacuum system to remove fluids from just about anywhere
- Simply fasten your vacuum hose and place in/on the area to be cleared of water
- Inlets on the side make it so you can set it flat on the ground
Vacu-Boom
- When the vacuum system is turned on, the boom seals itself to the surface like a giant suction cup to for a barrier. The waste water or other liquid is then extracted into the boom and removed.
- Can be used on any hard surface
- Fast set up and take down
- Stores in 5″ sections (other lengths available)
- High resistance to acids, caustics and petro chemicals
- Captures and contains concentrated flammables or hazardous liquids without extraction