ALKOTA INDUSTRIAL PARTS WASHERS
Choose an Alkota industrial parts washer around the components you clean. Start with part dimensions, load weight and the soil you need to remove.
High PSI can help you compare models for your shop. Check working height, turntable size, load capacity and utility requirements before selecting a configuration.
Front Load Industrial Automatic Parts Washers
AL3040
Model AL3040 Aqueous Parts Washer
Standard Features
- 40” Working Height with generous 30” diameter turntable
- 1/5 HP gear-driven turntable system
- 22 PSI @ 40 GPM spray performance powered by a 1 HP motor
- Industrial disc-type oil skimmer for extended solution life
- 60-minute wash timer with adjustable thermostat up to 175°F
- Heavy-duty debris screen and 1000 lb load capacity
- 4.5 kW heater with low water shut-off (LWS) protection
- 40-gallon solution tank capacity
- 16 drilled-orifice stainless spray bar for 360° coverage
- Turntable jog switch for easy loading/unloading
- Rugged 12-gauge steel construction throughout
- 3” heavy-duty casters for mobility
- Low water shut-off safety system
- 230 Volt / 1 Phase / 27.6 Amps electrical requirement
- Compact overall dimensions: 34”L x 48”W x 60”H
Shipping weight: 800 lbs
Available Options
- 4” cabinet vent with flap
- 24-hour / 7-day programmable heater & skimmer timer
- 2 HP pump upgrade (40 GPM @ 50 PSI)
- Automatic water fill system
- Cast iron filter strainer
- Parts basket
- 11” x 11” x 6” PWH-AL6109 T-bar parts tree
- AL2RSPT parts tree
- 100-micron FI bag filter
- Stainless steel door, turntable, and plumbing upgrades
Note: This model is not available in 3-phase power.
Whether you need a reliable daily cleaning solution or a flexible system for varying part sizes, the AL3040 delivers professional results with minimal maintenance.
Ready to upgrade your parts cleaning process? Contact our specialists today to discuss your application, request a custom quote, or ask about this model.
AL3045
Model AL3045 Aqueous Parts Washer
Standard Features
- 45” Working Height with 30” diameter turntable
- Heavy-duty gear drive turntable system
- 50 PSI @ 26 GPM low-pressure spray performance
- 3 HP motor for powerful cleaning action
- Industrial disc-type oil skimmer
- 60-minute wash timer with adjustable thermostat up to 175°F
- Debris screen and 1500 lb load capacity
- Large 127-gallon solution tank
- 9 kW heater with low water shut-off (LWS) protection
- 17 brass nozzles with intermediate spray bar and jets for full 360° coverage
- Turntable jog switch for precise positioning during loading
- Rugged 12-gauge steel construction with 10-gauge tank
- Low water shut-off safety system
- 230/460 Volt / 3 Phase / 60 Hz (48.8 / 24.4 Amps)
- Overall dimensions: 48”L x 48”W x 77”H
- Shipping weight: 850 lbs
Available Options
- 4” cabinet vent with flap
- 24-hour / 7-day programmable heater & skimmer timer
- 230 Volt single phase electrical configuration (56.2 amps)
- Automatic water fill system
- Crane slot for easy handling
- 3” heavy-duty casters
- Tank insulation and full unit insulation
- Parts basket
- 11” x 11” x 6” PWH-AL6109 T-bar parts tree
- PWH-AL2RSPT parts tree
- 100-micron FI bag filter
- Stainless steel door, turntable, plumbing, parts tree & basket upgrades
Ideal for facilities requiring reliable, efficient, and low-maintenance parts cleaning, the AL3045 delivers consistent results with built-in safety features and flexible configuration options.
Ready to upgrade your parts cleaning process? Contact our specialists today to discuss your application, request a custom quote, or ask about this model.
AL3054
Model AL3054 Aqueous Parts Washer
The AL3054 is a turntable aqueous parts washer. Review its cleaning chamber, load capacity and electrical requirements in the specifications below.
Standard Features
- 54” Working Height with 30” diameter turntable
- Heavy-duty gear drive turntable system
- 65 PSI @ 45 GPM low-pressure spray performance
- 5 HP motor for superior cleaning power
- Industrial disc-type oil skimmer for extended solution life
- 60-minute wash timer with adjustable thermostat up to 175°F
- Debris screen and 1500 lb load capacity
- Large 127-gallon solution tank
- 13.5 kW heater with low water shut-off (LWS) protection
- 19 brass nozzles with intermediate spray bar and jets for complete 360° coverage
- Turntable jog switch for easy loading and unloading
- Rugged 12-gauge steel construction with 10-gauge tank
- Low water shut-off safety system
- 230/460 Volt / 3 Phase / 60 Hz (54.4 / 27.2 Amps)
- Overall dimensions: 48”L x 48”W x 86”H
- Shipping weight: 1400 lbs
Available Options
- 4” cabinet vent with flap
- 24-hour / 7-day programmable heater & skimmer timer
- 230 Volt single phase electrical (67.2 Amps)
- Automatic water fill system
- Crane slot for overhead handling
- 3” heavy-duty casters
- Tank insulation and entire unit insulation
- Cast iron strainer
- Parts basket
- 11” x 11” x 6” PWH-AL6109 T-bar parts tree
- PWH-AL2RSPT parts tree
- 100-micron FI bag filter
- Stainless steel door, turntable, plumbing, parts tree & basket upgrades
Built for reliability and operator safety, the AL3054 is the perfect aqueous parts washer for facilities that need serious cleaning power, generous capacity, and long-term durability in a compact square footprint.
Ready to upgrade your parts cleaning process? Contact our specialists today to discuss your application, request a custom quote, or ask about this model.
AL3645
Model AL3645 Aqueous Parts Washer
The AL3645 is a turntable aqueous parts washer. Review its cleaning chamber, load capacity and electrical requirements in the specifications below.
Standard Features
- 45” Working Height with extra-large 36” diameter turntable
- Heavy-duty gear drive turntable system
- 65 PSI @ 45 GPM low-pressure spray performance
- 5 HP motor for powerful and consistent cleaning
- Industrial disc-type oil skimmer for longer solution life
- 60-minute wash timer with adjustable thermostat up to 175°F
- Debris screen and 1500 lb load capacity
- Large 166-gallon solution tank
- 15 kW heater with low water shut-off (LWS) protection
- 19 brass nozzles with intermediate spray bar and jets for full 360° coverage
- Turntable jog switch for easy loading and positioning
- Rugged 12-gauge steel construction with 10-gauge tank
- Low water shut-off safety system
- 230/460 Volt / 3 Phase / 60 Hz (52.8 / 26.4 Amps)
- Overall dimensions: 54”L x 54”W x 77”H
- Shipping weight: 1100 lbs
Available Options
- 4” cabinet vent with flap
- 24-hour / 7-day programmable heater & skimmer timer
- 230 Volt single phase electrical (93.2 Amps)
- Automatic water fill system
- Crane slot for overhead handling
- Tank insulation and entire unit insulation
- Parts basket
- 11” x 11” x 6” PWH-AL6109 T-bar parts tree
- PWH-AL2RSPT parts tree
- 100-micron FI bag filter
- Stainless steel door, turntable, plumbing, parts tree & basket upgrades
Built with industrial-grade durability and operator-friendly features, the AL3645 delivers reliable, efficient, and consistent aqueous parts washing results with minimal maintenance. A strong choice for facilities looking for a powerful yet compact turntable parts washer.
Ready to upgrade your parts cleaning process? Contact our specialists today to discuss your application, request a custom quote, or ask about this model.
AL3654
Model AL3654 Aqueous Parts Washer
Standard Features
- 54” Working Height with extra-large 36” diameter turntable
- Heavy-duty gear drive turntable system
- 75 PSI @ 60 GPM low-pressure, high-flow spray performance
- 7.5 HP motor for maximum cleaning power
- Industrial disc-type oil skimmer for extended solution life
- 60-minute wash timer with adjustable thermostat up to 175°F
- Debris screen and 1500 lb load capacity
- Large 166-gallon solution tank
- 15 kW heater with low water shut-off (LWS) protection
- 21 brass nozzles with intermediate spray bar and jets for complete 360° coverage
- Turntable jog switch for convenient loading and unloading
- Rugged 12-gauge steel construction with 10-gauge tank
- Low water shut-off safety system
- 230/460 Volt / 3 Phase / 60 Hz (59.6 / 29.8 Amps)
- Overall dimensions: 54”L x 54”W x 86”H
- Shipping weight: 1100 lbs
Available Options
- 4” cabinet vent with flap
- 24-hour / 7-day programmable heater & skimmer timer
- 230 Volt single phase electrical (93.2 Amps)
- Automatic water fill system
- Crane slot for overhead handling
- Tank insulation and entire unit insulation
- Parts basket
- 11” x 11” x 6” PWH-AL6109 T-bar parts tree
- PWH-AL2RSPT parts tree
- 100-micron FI bag filter
- Stainless steel door, turntable, plumbing, parts tree & basket upgrades
Ready to upgrade your parts cleaning process? Contact our specialists today to discuss your application, request a custom quote, or ask about this model.
AL5045
Model AL5045 Aqueous Parts Washer
Standard Features
- 45” Working Height with extra-large 50” diameter turntable
- Heavy-duty gear drive turntable system
- 75 PSI @ 60 GPM low-pressure, high-flow spray performance
- 7.5 HP motor for powerful cleaning action
- Industrial disc-type oil skimmer for extended solution life
- 60-minute wash timer with adjustable thermostat up to 175°F
- Debris screen and 1500 lb load capacity
- Oversized 280-gallon solution tank
- 18 kW heater with low water shut-off (LWS) protection
- 23 brass nozzles with intermediate spray bar and jets for full 360° coverage
- Turntable jog switch for easy loading and positioning
- Rugged 12-gauge steel construction with 10-gauge tank
- Low water shut-off safety system
- 230/460 Volt / 3 Phase / 60 Hz (67.2 / 33.6 Amps)
- Overall dimensions: 68”L x 68”W x 77”H
- Shipping weight: 1250 lbs
Available Options
- 4” cabinet vent with flap
- 24-hour / 7-day programmable heater & skimmer timer
- Automatic water fill system
- Crane slot for overhead handling
- Tank insulation and entire unit insulation
- 250,000 BTU gas fired heat
- Cast iron filter strainer
- Parts basket
- 11” x 11” x 6” PWH-AL6109 T-bar parts tree
- PWH-AL2RSPT parts tree
- 100-micron FI bag filter
- Stainless steel door, turntable, plumbing, parts tree & basket upgrades
Built for durability, safety, and consistent results, this industrial parts washer is an excellent solution for machine shops, manufacturers, and rebuild facilities with bigger cleaning demands.
Ready to upgrade your parts cleaning operation? Contact our team today to discuss your specific application, request more information, or get a customized recommendation for the AL5045 aqueous parts washer.
AL5060
Model AL5060 Aqueous Parts Washer
The AL5060 is a turntable aqueous parts washer. Review its cleaning chamber, load capacity and electrical requirements in the specifications below.
Standard Features
- 60” Working Height with extra-large 50” diameter turntable
- Heavy-duty gear drive turntable system
- 75 PSI @ 60 GPM low-pressure, high-flow spray performance
- 7.5 HP motor for powerful cleaning action
- Industrial disc-type oil skimmer for extended solution life
- 60-minute wash timer with adjustable thermostat up to 175°F
- Debris screen and 1500 lb load capacity
- Oversized 280-gallon solution tank
- 18 kW heater with low water shut-off (LWS) protection
- 23 brass nozzles with intermediate spray bar and jets for complete 360° coverage
- Turntable jog switch for easy loading and unloading
- Rugged 12-gauge steel construction with 10-gauge tank
- Low water shut-off safety system
- 230/460 Volt / 3 Phase / 60 Hz (67.2 / 33.6 Amps)
- Overall dimensions: 68”L x 68”W x 93”H
- Shipping weight: 1400 lbs
Available Options
- 4” cabinet vent with flap
- 24-hour / 7-day programmable heater & skimmer timer
- Automatic water fill system
- Crane slot for overhead handling
- Tank insulation and entire unit insulation
- Cast iron filter strainer
- Parts basket
- 11” x 11” x 6” PWH-AL6109 T-bar parts tree
- PWH-AL2RSPT parts tree
- 100-micron FI bag filter
- Stainless steel door, turntable, plumbing, parts tree & basket upgrades
Engineered for durability and ease of use, the AL5060 is the ideal aqueous parts washer for manufacturers, rebuild shops, and maintenance facilities with large parts cleaning requirements.
Ready to upgrade your parts cleaning process? Contact our team today to discuss your application, request more details, or get expert recommendations for the AL5060 turntable parts washer.
AL5072
Model AL5072 Aqueous Parts Washer
The AL5072 is a turntable aqueous parts washer. Review its cleaning chamber, load capacity and electrical requirements in the specifications below.
Standard Features
- 72” Working Height with extra-large 50” diameter turntable
- Heavy-duty gear drive turntable system
- 75 PSI @ 60 GPM low-pressure, high-flow spray performance
- 10 HP motor for superior cleaning power
- Industrial disc-type oil skimmer for extended solution life
- 60-minute wash timer with adjustable thermostat up to 175°F
- Debris screen and 1500 lb load capacity
- Large 280-gallon solution tank
- 18 kW heater with low water shut-off (LWS) protection
- 27 brass nozzles with intermediate spray bar and jets for full 360° coverage
- Turntable jog switch for safe and easy loading/unloading
- Rugged 12-gauge steel construction with 10-gauge tank
- Low water shut-off safety system
- 230/460 Volt / 3 Phase / 60 Hz (73.2 / 36.6 Amps)
- Overall dimensions: 68”L x 68”W x 96”H
- Shipping weight: 1250 lbs
Available Options
- 4” cabinet vent with flap
- 24-hour / 7-day programmable heater & skimmer timer
- Automatic water fill system
- Crane slot for overhead handling
- Tank insulation and entire unit insulation
- 250,000 BTU gas fired heat
- Cast iron filter strainer
- Parts basket
- 11” x 11” x 6” PWH-AL6109 T-bar parts tree
- FI bag filter 100 micron
- Stainless steel door, turntable, plumbing, parts tree & basket upgrades
Ready to upgrade your parts cleaning operation? Contact our team today to discuss your specific application, request more information, or get expert recommendations for the AL5072 industrial aqueous parts washer.
AL2735
Model AL2735 Aqueous Parts Washer
Note: Turntable does not roll out
Standard Features
- 35” Working Height with 27” diameter turntable
- Heavy-duty gear drive turntable system
- 50 PSI @ 26 GPM spray performance
- 3 HP motor for strong cleaning action
- Industrial disc-type oil skimmer for extended solution life
- 60-minute wash timer with adjustable thermostat up to 175°F
- Debris screen and 500 lb load capacity
- 94-gallon solution tank
- 15 kW heater with low water shut-off (LWS) protection
- 17 brass nozzles with intermediate spray bar and jets for full 360° coverage
- Turntable jog switch for easy loading and unloading
- Rugged 12-gauge steel construction with 10-gauge tank
- Low water shut-off safety system
- 230/460 Volt / 3 Phase / 60 Hz (47.2 / 23.6 Amps)
- Overall dimensions: 48”L x 46”W x 67”H
- Shipping weight: 850 lbs
Available Options
- 4” cabinet vent with flap
- 24-hour / 7-day programmable heater & skimmer timer
- 230 Volt single phase electrical (76 Amps)
- Automatic water fill system
- Tank insulation and entire unit insulation
- 3” heavy-duty casters
- Cast iron filter strainer
- Parts basket
- 11” x 11” x 6” PWH-AL6109 T-bar parts tree
- FI bag filter 100 micron
- Stainless steel door, turntable, plumbing, parts tree & basket upgrades
Ready to upgrade your parts cleaning process? Contact our team today to discuss your application, request more information, or get expert recommendations for the AL2735 aqueous parts washer.
AL3640RO
Model AL3640 Aqueous Parts Washer
Standard Features
- 40” Working Height with extra-large 36” diameter turntable
- Heavy-duty gear drive turntable system
- 65 PSI @ 45 GPM high-pressure, high-flow spray performance
- 5 HP motor for powerful cleaning action
- Industrial disc-type oil skimmer for extended solution life
- 60-minute wash timer with adjustable thermostat up to 175°F
- Debris screen and 1500 lb load capacity
- 192-gallon solution tank
- 15 kW heater with low water shut-off (LWS) protection
- 26 brass nozzles with intermediate spray bar and jets for full 360° coverage
- Turntable jog switch for convenient loading and unloading
- Rugged 12-gauge steel construction with 10-gauge tank
- Low water shut-off safety system
- 230/460 Volt / 3 Phase / 60 Hz (49.1 / 24.6 Amps)
- Overall dimensions: 63”L x 42”W x 76”H
- Shipping weight: 1300 lbs
Available Options
- 4” cabinet vent with flap
- 24-hour / 7-day programmable heater & skimmer timer
- Automatic water fill system
- 230 Volt single phase electrical (93.2 Amps)
- Tank insulation and entire unit insulation
- Cast iron filter strainer
- Parts basket
- 11” x 11” x 6” PWH-AL6109 T-bar parts tree
- FI bag filter 100 micron
- Stainless steel door, turntable, plumbing, parts tree & basket upgrades
Engineered for durability, safety, and ease of use, the AL3640 is a great solution for facilities looking for increased capacity without requiring excessive floor space.
Ready to upgrade your parts cleaning operation? Contact our team today to discuss your specific application, request more information, or get expert recommendations for the AL3640 aqueous parts washer.
AL4054RO
Model AL4054 Aqueous Parts Washer
Standard Features
| • 54” Working Height with large 40” diameter turntable | • 7.5 HP motor for maximum cleaning power |
|---|---|
| • Heavy-duty gear drive turntable system | • Industrial disc-type oil skimmer for extended solution life |
| • 75 PSI @ 60 GPM low-pressure, high-flow spray performance | • 60-minute wash timer with adjustable thermostat up to 175°F |
| • Debris screen and 1500 lb load capacity | • Large 243-gallon solution tank |
| • 18 kW heater with low water shut-off (LWS) protection | • 35 brass nozzles with intermediate spray bar & jets for 360° coverage |
| • Turntable jog switch for easy loading/unloading | • Rugged 12-gauge steel construction with 10-gauge tank |
| • Low water shut-off safety system | • 230/460 Volt / 3 Phase / 60 Hz (67.2 / 33.6 Amps) |
| • Overall dimensions: 75”L x 59”W x 86”H | • Shipping weight: 2000 lbs |
Available Options
| • 4” Cabinet Vent w/Flap Plate | • Tank Insulation |
|---|---|
| • 24 Hour/7 Day Heater & Skimmer Timer | • Entire Unit Insulation |
| • Automatic Water Fill | • 3” Casters |
| • Cast Iron Filter Strainer | • Parts Basket |
| • 11” x 11” x 6” PWH-AL6109 T-Bar Parts Tree | • FI Bag Filter 100 Micron |
| • Stainless Steel Door, Turntable, Plumbing, Parts Tree & Basket |
Ready to upgrade your parts cleaning operation? Contact our team today to discuss your specific application, request more information, or get expert recommendations for the AL4054 aqueous parts washer.
AL3030RBD
Model AL3030 Aqueous Parts Washer
The AL3030 is a turntable aqueous parts washer. Review its cleaning chamber, load capacity and electrical requirements in the specifications below.
Standard Features
| • 30” Working Height with 30” diameter turntable | • 3 HP motor for strong cleaning performance |
|---|---|
| • Heavy-duty gear drive turntable system | • Industrial disc-type oil skimmer |
| • 50 PSI @ 26 GPM high-pressure spray system | • 60-minute wash timer with thermostat up to 175°F |
| • Debris screen and 1500 lb load capacity | • 120-gallon solution tank |
| • 9 kW heater with low water shut-off (LWS) | • 27 brass nozzles with intermediate spray bar & jets for 360° coverage |
| • Turntable jog switch | • Rugged 12-gauge steel construction with 10-gauge tank |
| • Low water shut-off safety system | • 230/460 Volt / 3 Phase / 60 Hz (48.8 / 24.4 Amps) |
| • Overall dimensions: 48”L x 48”W x 64”H | • Shipping weight: 1250 lbs |
Available Options
| • 4” Cabinet Vent w/Flap Plate | • Tank Insulation |
|---|---|
| • 24 Hour/7 Day Heater & Skimmer Timer | • Entire Unit Insulation |
| • Automatic Water Fill | • 3” Casters |
| • Cast Iron Filter Strainer | • Parts Basket |
| • 11” x 11” x 6” PWH-AL6109 T-Bar Parts Tree | • FI Bag Filter 100 Micron |
| • Stainless Steel Door, Turntable, Plumbing, Parts Tree & Basket |
Ready to upgrade your parts cleaning operation? Contact our team today to discuss your specific application, request more information, or get expert recommendations for the AL3030 aqueous parts washer.
AL3048RBD
Model AL3048 Aqueous Parts Washer
The AL3048 is a turntable aqueous parts washer. Review its cleaning chamber, load capacity and electrical requirements in the specifications below.
Standard Features
| • 48” Working Height with 30” diameter turntable | • 5 HP motor for powerful cleaning action |
|---|---|
| • Heavy-duty gear drive turntable system | • Industrial disc-type oil skimmer |
| • 65 PSI @ 45 GPM high-pressure, high-flow spray | • 60-minute wash timer with thermostat up to 175°F |
| • Debris screen and 1500 lb load capacity | • 120-gallon solution tank |
| • 15 kW heater with low water shut-off (LWS) | • 18 brass nozzles with intermediate spray bar & jets for 360° coverage |
| • Turntable jog switch | • Rugged 12-gauge steel construction with 10-gauge tank |
| • Low water shut-off safety system | • 230/460 Volt / 3 Phase / 60 Hz (60 / 30 Amps) |
| • Overall dimensions: 48”L x 48”W x 80”H | • Shipping weight: 925 lbs |
Available Options
| • 4” Cabinet Vent w/Flap Plate | • Tank Insulation |
|---|---|
| • 24 Hour/7 Day Heater & Skimmer Timer | • Entire Unit Insulation |
| • 230 Volt Single Phase (105.2 Amps) | • 3” Casters |
| • Automatic Water Fill | • Cast Iron Filter Strainer |
| • Parts Basket | • 11” x 11” x 6” PWH-AL6109 T-Bar Parts Tree |
| • Secondary Removable Turntable | • FI Bag Filter 100 Micron |
| • Stainless Steel Door, Turntable, Plumbing, Parts Tree & Basket |
Ready to upgrade your parts cleaning operation? Contact our team today to discuss your specific application, request more information, or get expert recommendations for the AL3048 aqueous parts washer.