Select Page

Rea Steamer Accessories

REA Steam Cleaning

Long Lances

Applications: For use on hard to reach surfaces and those that are not flat. Perfect for reaching in behind obstructions and on surfaces and equipment that have crevices, cracks, wires and cables etc.

Long Lances

 

 

 

 

 

 

 

 

Usage instructions/Notes: The vapor discharge pressure will blow away any loose materials and soils but to clean and sanitize, the tip of the lance should be as close as possible to the surface being cleaned, optimizing the effect of the heat in melting/dissolving soils and sanitizing the surface.

Short Lance

Applications: A very easy to handle tool useful for the thorough cleaning of small surfaces and complex shaped objects. Allows close-up cleaning of items held in a clamp or in the operator’s gloved hand.

Short Lance

 

 

 

 

 

 

 

 

Usage instructions/Notes: Operator should wear safety gloves when holding items to be cleaned.

Suction Lances

Applications: Very practical tool for cleaning small surfaces and parts – vapor is introduced through a centered lance and suction removes soils and any moisture. Excellent for confined small areas where visibility and soil removal would be an issue.

Suction Lances

 

 

 

 

 

 

 

 

Usage instructions/Notes: Rea vacuum which is controlled from the Universal handle is recommended however any suction source can be used.

Brush Holders

Applications: The brush holder allows nylon or stainless steel brushes to be used along with the vapor to remove encrusted dirts, help break up greases & oils and break down biofilms.

Brush Holders

 

 

 

 

 

 

 

 

Usage instructions/Notes: As with most accessories contact with the surface being cleaned achieves the best results by ensuring maximum heat is transferred to the soils being removed.

Squeegees

Applications: The brush holder allows nylon or stainless steel brushes to be used along with the vapor to remove encrusted dirts, help break up greases & oils and break down biofilms.

Squeegees

 

 

 

 

 

 

 

 

Usage instructions/Notes: As with most accessories contact with the surface being cleaned achieves the best results by ensuring maximum heat is transferred to the soils being removed.

Floor Squeegee

Applications: Perfect for cleaning and sanitizing floors quickly. Vapor penetrates holes and cracks in the floor loosening soils, fats, oils and greases allowing them to be directed to a drain or other collection area. The vapor heat leaves the floor dry and ready to handle traffic.

Floor Squeegee

 

 

 

 

 

 

 

 

Usage instructions/Notes: Always pull the squeegee towards you and towards the drain. If there are ground in soils or embedded fats etc a floor tool with a brush strip to break up stubborn soils may be better.

Suction Brushes

Applications: These brushes combine vapor, mechanical abrasion with a nylon bristle strip and vacuum to remove all moisture and soils. Ideal for cleaning and sanitizing smooth and semi smooth surfaces where the cleaned surface must be dry and ready to use after cleaning. Perfect for conveyor belts in food preparation facilities. Also useful in cleaning fabrics and other surfaces where moisture needs to be removed as part of cleaning process.

Suction Brushes

 

 

 

 

 

 

 

 

Usage instructions/Notes: The suction units can be firmly held in place while the conveyor is run allowing an operator to clean an entire belt from one location. Rea also has available special brackets that let these brushes be temporarily installed on a line and operated without an operator being in attendance! Custom sizes for specific conveyor belt sizes can be provided as an option.

Floor Brushes

Applications: Perfect for cleaning hard surfaces where cleaning, sanitizing and drying is required. Can be used with or without detergent. Vapor and agitation strip break up soils, fats, greases and oils and vacuum removes them for appropriate disposal.

Used for Hazmat cleanup as well as blood, greases, sugars etc in food preparation.

Floor Brushes

 

 

 

 

 

 

 

 

Usage instructions/Notes: Push unit away at an upward angle when applying vapor and optional detergent. Pull unit toward you with head flat to floor when suctioning soil and debris. The 70 cm tool is only recommended for smooth and very flat floors.

 

Contact Form

Name(Required)

Subscribe!